Controls |
SKU |
Price |
|---|---|---|
| Analog | OH:30392164 |
$3,356
|
| Digital | OH:30392171 |
$3,930
|
Ohaus Multi-Tube Vortexers are ideal for high throughput sample processing. Interchangeable foam racks for vortexing tubes from 10 to 29 mm in diameter available. Vortexing action is created by securing the top of the sample in place while allowing the bottom to rotate freely in a 3.6 mm orbit. Suction cup feet reduce motion and prevent sliding on work surface. Analog & digital models, both microprocessor-controlled and run in continuous or timed mode.
Analog Multi-Tube Vortexers
One piece, stainless steel housing design optimizes clean-ups. Ideal for applications requiring accuracy and repeatability. The stainless steel one piece housing design is conducive to keeping your vortexer clean and free from contaminants. Microprocessor Control: The variable speed microprocessor control provides consistent uniform mixing action. Adjustment Knobs: Basic speed and time knobs with 1 to 10 dial markings. Model VXMTAL
Digital Multi-Tube Vortexers
One piece, stainless steel housing design optimizes clean-ups. Ideal for applications requiring accuracy and repeatability. The stainless steel one piece housing design is conducive to keeping your vortexer clean and free from contaminants. Microprocessor Control: The variable speed microprocessor control provides consistent uniform mixing action. LED Display: Touch pad controls with easy-to-read, independent LED displays for speed and time allow operator to view both settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time or, when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last used settings, even after power has been turned off. Pulsing Mode: Programmable pulsing mode allows user to adjust the pulse-on and pulse-off times between 1 and 59 seconds in 1 second intervals. This feature enhances the vortex action by creating a more vigorous mix. Model VXMTDG
| Type | Vortexers |
| Incubation | No |
| Refrigeration | No |
| Stacking | No |
| Platform Area (ft^2) | n/a |
| Max Load (lb) | 10 |
| RPM - Max | 2500 |
| RPM - Min | 500 |
| Orbit Diameter (mm) | 3.6 mm |
| Platform Dimensions | n/a |
| Warranty | 2 years |
| Weight (lb) | 42 |
| Width (in) | 9.5 |
| Depth (in) | 15.1 |
| Height (in) | 16 |
| Model | Standard Stainless Steel |
Advanced Stainless Steel |
| Control Type | Analog | Digital |
| Unit Type | Analog | Digital |
| Frequency | 50/60 Hz | |
| Voltage | 120V | 120V |
| Amps | 0.8 | 0.8 |
| Watts | 100 | 100 |
| Speed Range | 1200 to 2400 rpm | 500 to 2500 rpm |
| Speed Disclaimer | Maximum speed will vary depending on load | |
| Orbit | 3.6 mm | |
| Controls | Run/Standby/Timer Rocker Switch. Speed Knob: Variable 1 to 10 Dial Marks for Speed and Time | Run/Standby/Timer Rocker Switch. LED Displays For Speed/Time. Up/Down Buttons For Set-Point Control. On/Off Pulse Buttons |
| Capacity | 10 lbs (4.5kg) | |
| Duty Rating | Continuous Duty | |
| Dimensions | 9.5 x 15.1 x 16" | |
| Tray Dimensions | 7.25 x 12.25" | |
| Operating Conditions T | from 4 to 40°C | from 4 to 40°C |
| Operating Conditions H | 20% to 85% relative humidity, non-condensing. | |
| Applications | Suspensions, high throughput testing in clinical, environmental, and chemistry labs | |
| Certifications | UL | UL |
| Warranty | 2 years | |
| Unit Supplied With | Unit includes a 92" (234cm) detachable, 3-wire cord and plug. Unit is also supplied with a Tray Pad Set for support and one, 12mm Test Tube Foam Rack (945072). | |
| Origin | Manufactured in the USA | |
| Microprocessor Control | The variable speed microprocessor control provides consistent uniform mixing action. | |
| Pulsing Mode | N/A | Programmable pulsing mode |
