Laboratory Supply Network is open and operational during the COVID-19 pandemic. You can find updates pertaining to any supply chain issues in this post.

Ohaus Multi-Tube Vortexers

Category Vortexers
Manufacturer Ohaus
Country of manufacture the United States
Overview

Ohaus Multi-Tube Vortexers are ideal for high throughput sample processing. Interchangeable foam racks for vortexing tubes from 10 to 29 mm in diameter available. Vortexing action is created by securing the top of the sample in place while allowing the bottom to rotate freely in a 3.6 mm orbit. Suction cup feet reduce motion and prevent sliding on work surface. Analog & digital models, both microprocessor-controlled and run in continuous or timed mode.

  • Digital Models Ideal for Applications that Require Accuracy and Repeatability
  • Pulsing Mode on Digital Models to Enhance Vortexing Action
  • Analog Model Offers an Economical Alternative When Exact Speed/Time Not Required

    Analog Multi-Tube Vortexers

    One piece, stainless steel housing design optimizes clean-ups. Ideal for applications requiring accuracy and repeatability. The stainless steel one piece housing design is conducive to keeping your vortexer clean and free from contaminants. Microprocessor Control: The variable speed microprocessor control provides consistent uniform mixing action. Adjustment Knobs: Basic speed and time knobs with 1 to 10 dial markings. Model VXMTAL

    Digital Multi-Tube Vortexers

    One piece, stainless steel housing design optimizes clean-ups. Ideal for applications requiring accuracy and repeatability. The stainless steel one piece housing design is conducive to keeping your vortexer clean and free from contaminants. Microprocessor Control: The variable speed microprocessor control provides consistent uniform mixing action. LED Display: Touch pad controls with easy-to-read, independent LED displays for speed and time allow operator to view both settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time or, when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last used settings, even after power has been turned off. Pulsing Mode: Programmable pulsing mode allows user to adjust the pulse-on and pulse-off times between 1 and 59 seconds in 1 second intervals. This feature enhances the vortex action by creating a more vigorous mix. Model  VXMTDG

     Key Attributes 
    Type Vortexers
    Incubation No
    Refrigeration No
    Stacking No
    Platform Area (ft^2) n/a
    Max Load (lb) 10
    RPM - Max 2500
    RPM - Min 500
    Orbit Diameter (mm) 3.6 mm
    Platform Dimensions n/a
    Warranty 2 years
    Weight (lb) 42
    Width (in) 9.5
    Depth (in) 15.1
    Height (in) 16

     

    Manufacturer Specifications
    Model Standard
    Stainless Steel
    Advanced
    Stainless Steel
    Control Type Analog Digital
    Unit Type Analog Digital
    Frequency 50/60 Hz
    Voltage 120V 120V
    Amps 0.8 0.8
    Watts 100 100
    Speed Range 1200 to 2400 rpm 500 to 2500 rpm
    Speed Disclaimer Maximum speed will vary depending on load
    Orbit 3.6 mm
    Controls Run/Standby/Timer Rocker Switch. Speed Knob: Variable 1 to 10 Dial Marks for Speed and Time Run/Standby/Timer Rocker Switch. LED Displays For Speed/Time. Up/Down Buttons For Set-Point Control. On/Off Pulse Buttons
    Capacity 10 lbs (4.5kg)
    Duty Rating Continuous Duty
    Dimensions 9.5 x 15.1 x 16"
    Tray Dimensions 7.25 x 12.25"
    Operating Conditions T from 4 to 40°C from 4 to 40°C
    Operating Conditions H 20% to 85% relative humidity, non-condensing.
    Applications Suspensions, high throughput testing in clinical, environmental, and chemistry labs
    Certifications UL UL
    Warranty 2 years
    Unit Supplied With Unit includes a 92" (234cm) detachable, 3-wire cord and plug. Unit is also supplied with a Tray Pad Set for support and one, 12mm Test Tube Foam Rack (945072).
    Origin Manufactured in the USA
    Microprocessor Control The variable speed microprocessor control provides consistent uniform mixing action.
    Pulsing Mode N/A Programmable pulsing mode
    SHOW MORE SHOW LESS
    SALE

    select from options below to see SKU

    Green Leaf
    All shipments originating from Laboratory Supply Network are carbon neutral!

    Do you need assistance?

    We have experts standing by to assist you with your purchase. Call now at +1 603-652-1395 or contact us by clicking the button below.

    Customer reviews

    No reviews yet

    Ohaus Multi-Tube Vortexers Accessories